Quick answers
Common jobs worked out with the calculators' default assumptions. Open a calculator to change the sizes, waste or product and see every step.
| Job | Answer | Calculator |
|---|---|---|
| Concrete for a 10 × 10 ft slab, 4 in thick | 1.36 yd³ with 10% waste, or 62 bags of 80 lb mix | Concrete Bags |
| 80 lb bags of concrete in one cubic yard | 45 bags (60 of 60 lb) | Concrete |
| Concrete for one 4 × 4 fence post (10 in hole, 30 in deep) | 2.7 bags of 50 lb mix | Post Hole Concrete |
| Gravel for a 10 × 50 ft driveway, 4 in deep | 9.5 tons | Gravel |
| Shingles for a 40 × 24 ft gable roof at 6/12 | 12 squares, 36 bundles | Roofing |
| Decking for a 12 × 12 ft deck | 29 twelve-foot boards, 10 joists at 16 in | Deck |
| Posts for a 100 ft fence with one gate | 15 posts at 8 ft spacing | Fence |
| Drywall for a 12 × 12 ft room, walls and ceiling | 19 sheets of 4 × 8 | General Materials |
| Stairs for a 9 ft (108 in) floor-to-floor rise | 14 risers of 7.71 in, 13 treads | Stairs |
Concrete includes 10% waste, decking 10%, fence pickets 5%; drywall uses the calculator's default waste. Gravel assumes 2,800 lb per cubic yard.
How the numbers are worked out
- Formula first. Each calculator starts from a written formula with its units, rounding and defaults, and shows that formula next to your result.
- One tested engine. Every calculator, and every table and example on this site, runs on the same calculation engine. Automated reference tests check it against hand-worked cases, edge values and rejected inputs.
- What you buy, not just volume. Bags, sheets, boards and bundles are rounded up to whole units, and the exact amount is shown next to the amount with waste.
- Code checks where they matter. The stair calculator checks riser and tread limits from the 2021 International Residential Code, and the roofing calculator warns on pitches too low for shingles.
- Private and offline. Calculations run in your browser and keep working without a connection after your first visit.
Read how the calculators are built and checked, or see the calculation disclaimer: results are planning estimates, not engineering or code approval.
Guides
- How to Calculate Concrete: The L × W × T method, converting to cubic yards, waste factors, and when to order ready-mix vs bagged mix.
- How to Calculate Stairs: Rise and run, counting risers and treads, the comfort rule, and cutting a stringer from your numbers.